KONFIGURASI ROUTER RIP Jaringan Komputer

KONFIGURASI ROUTER RIP Jaringan Komputer

https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhIJbtSQDUq0OZE_a-eoRDrt_iTgW2BXKJlsNiFnw3Jb4ZXbgLu0yl-l7JSRS9wACZ5Rl7tBoQniW0WS1P3l2WczVKYUYtTJHv8eO9Vs_ArE0OFNGppDU3gBna4ipBh-qwKnohncZAs70CY/s72-c/router+rifky1.png

KONFIGURASI ROUTER RIP

Router0 Rifky 1

=====================================================================================

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.1.1 255.255.255.0

Router(config-if)#no shu

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int fa1/0

Router(config-if)#ip add 192.168.2.1 255.255.255.0

Router(config-if)#no shu

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

Router(config-if)#exit

Router(config)#int s2/0

Router(config-if)#ip add 10.10.10.1 255.255.255.252

Router(config-if)#no shu

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit

Router(config)#hostname rifky1_0141

rifky1_0141(config)#

+++

rifky1_0141>ena

rifky1_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky1_0141(config)#router rip

rifky1_0141(config-router)#network 192.168.1.0

rifky1_0141(config-router)#network 192.168.2.0

rifky1_0141(config-router)#network 192.168.3.0

rifky1_0141(config-router)#network 192.168.4.0

rifky1_0141(config-router)#network 192.168.5.0

rifky1_0141(config-router)#network 192.168.6.0

rifky1_0141(config-router)#network 10.10.10.0

rifky1_0141(config-router)#network 20.20.20.0

rifky1_0141(config-router)#network 30.30.30.0

Router 1 Rifky2

=====================================================================================

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname rifky2_0141

rifky2_0141(config)#int s2/0

rifky2_0141(config-if)#ip add 10.10.10.2 255.255.255.252

rifky2_0141(config-if)#no shu

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

rifky2_0141(config-if)#

rifky2_0141#

+++

rifky2_0141>ena

rifky2_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky2_0141(config)#router rip

rifky2_0141(config-router)#network 192.168.1.0

rifky2_0141(config-router)#network 192.168.2.0

rifky2_0141(config-router)#network 192.168.3.0

rifky2_0141(config-router)#network 192.168.4.0

rifky2_0141(config-router)#network 192.168.5.0

rifky2_0141(config-router)#network 192.168.6.0

rifky2_0141(config-router)#network 10.10.10.0

rifky2_0141(config-router)#network 20.20.20.0

rifky2_0141(config-router)#network 30.30.30.0

rifky2_0141(config-router)#

Router 2  Rifky3

=====================================================================================

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s3/0

Router(config-if)#ip add 20.20.20.2 255.255.255.252

Router(config-if)#no shu

%LINK-5-CHANGED: Interface Serial3/0, changed state to up

Router(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial3/0, changed state to up

Router(config-if)#exit

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.4.1

% Incomplete command.

Router(config-if)#

Router(config-if)#ip add 192.168.4.1 255.255.255.0

Router(config-if)#no shu

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#int s2/0

Router(config-if)#ip add 30.30.30.1 255.255.255.252

Router(config-if)#no shu

%LINK-5-CHANGED: Interface Serial2/0, changed state to down

Router(config-if)#

Router(config-if)#

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit

Router(config)#hostname rifky3_0141

rifky3_0141(config)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

rifky3_0141>ena

rifky3_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky3_0141(config)#router rip

rifky3_0141(config-router)#network 192.168.1.0

rifky3_0141(config-router)#network 192.168.2.0

rifky3_0141(config-router)#network 192.168.3.0

rifky3_0141(config-router)#network 192.168.4.0

rifky3_0141(config-router)#network 192.168.5.0

rifky3_0141(config-router)#network 192.168.6.0

rifky3_0141(config-router)#network 10.10.10.0

rifky3_0141(config-router)#network 20.20.20.0

rifky3_0141(config-router)#network 30.30.30.0

rifky3_0141(config-router)#

Router3  Rifky4

=====================================================================================

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#int s2/0

Router(config-if)#ip add 30.30.30.2 255.255.255.252

Router(config-if)#no shu

%LINK-5-CHANGED: Interface Serial2/0, changed state to up

Router(config-if)#exit

Router(config)#int fa0/0

Router(config-if)#ip add 192.168.5.1 255.255.255.0

Router(config-if)#no shu

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up

Router(config-if)#exit

Router(config)#hostname rifky4_0141

rifky4_0141(config)#int s2/0

rifky4_0141(config-if)#clock rate ?

Speed (bits per second

  1200          

  2400          

  4800          

  9600          

  19200          

  38400         

  56000         

  64000         

  72000         

  125000        

  128000        

  148000        

  250000        

  500000        

  800000        

  1000000       

  1300000       

  2000000       

  4000000       

  <300-4000000>  Choose clockrate from list above

rifky4_0141(config-if)#clock rate 9600

rifky4_0141(config-if)#

%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial2/0, changed state to up

rifky4_0141(config-if)#exit

rifky4_0141(config)#int fa1/0

rifky4_0141(config-if)#ip add 192.168.6.1 255.255.255.128

rifky4_0141(config-if)#no shu

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

rifky4_0141(config-if)#

rifky4_0141 con0 is now available

Press RETURN to get started.

rifky4_0141>ena

rifky4_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky4_0141(config)#int fa1/0

rifky4_0141(config-if)#no ip add

rifky4_0141(config-if)#exit

rifky4_0141(config)#

rifky4_0141 con0 is now available

Press RETURN to get started.

rifky4_0141>ena

rifky4_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky4_0141(config)#router rip

rifky4_0141(config-router)#network 192.168.1.0

rifky4_0141(config-router)#network 192.168.2.0

rifky4_0141(config-router)#network 192.168.3.0

rifky4_0141(config-router)#network 192.168.4.0

rifky4_0141(config-router)#network 192.168.5.0

rifky4_0141(config-router)#network 192.168.6.0

rifky4_0141(config-router)#network 10.10.10.0

rifky4_0141(config-router)#network 20.20.20.0

rifky4_0141(config-router)#network 30.30.30.0

rifky4_0141(config-router)#

Router 4 Rifky5

=====================================================================================

Router>ena

Router#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

Router(config)#hostname rifky5_0141

rifky5_0141(config)#int fa1/0

rifky5_0141(config-if)#ip add 192.168.6.1 255.255.255.128

rifky5_0141(config-if)#no shu

rifky5_0141(config-if)#

%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up

rifky5_0141 con0 is now available

Press RETURN to get started.

rifky5_0141>ena

rifky5_0141#conf t

Enter configuration commands, one per line.  End with CNTL/Z.

rifky5_0141(config)#router rip

rifky5_0141(config-router)#network 192.168.1.0

rifky5_0141(config-router)#network 192.168.2.0

rifky5_0141(config-router)#network 192.168.3.0

rifky5_0141(config-router)#network 192.168.4.0

rifky5_0141(config-router)#network 192.168.5.0

rifky5_0141(config-router)#network 192.168.6.0

rifky5_0141(config-router)#network 10.10.10.0

rifky5_0141(config-router)#network 20.20.20.0

rifky5_0141(config-router)#network 30.30.30.0

rifky5_0141(config-router)#

Maka Hasilnya :

Kita Coba Kirimkan Pesan untuk melihat Sukses tidaknya Konfirgurasi yang telah kita buat’,..

Hasil Dari Konfirgurasi Tersebut Adalah :

=====================================================================================

Semoga Bermanfaat’…………….

Related product you might see: